DeDietrich DTI1031X Installationsanleitung PDF herunterladen (Seite 6)

Quick Start Guide

Prior to using you appliance you need to ensure the appliance has been installed in accordance with the installation

instructions within this guide. Particular attention should be paid to the ventilation requirements as this could affect

the performance of the appliance as well as the long term reliability.

Operation

Care should be taken to ensure that the pan / pans being used are suitable both in size and material.

Place the pan on the zone and turn on the appliance using power control ”A”, select the power level required using

either the + and - controls “B”, or the pre-set levels “C”.

For further details of functions please see the “Product / safety features explained” section of this instruction book.

Noise

You may notice a clicking noise when either using multiple zones or a single zone on low power settings

(below level 7). This is normal and should not be considered a fault; it is the electronics of the appliance reg-

ulating the power delivery to the zones. You may notice a corresponding reduction of the bubbles in the base of the

pans on the hob, again this is normal.

Power sharing

The machine is manufactured with shared electronics controlling the cooking zones. The power delivered by

the independent electronics is split between the two zones. If “boost” is selected on one zone the power is

reduced on the other to ensure the maximum connected load is not breached. This is not a fault with the appliance.

You may wish to select “Boost” on the Continuum setting, it is worth noting that you may notice a clicking and alter-

nating bubble pattern in the base of the cookware, this is normal.

Suitable cookware

If the display on the appliance flashes when set, this is an indication that either there is no pan on the zone

or, an unsuitable pan is being used. Please refer to the pan guide in the description section of this guide for

further details.

Controls Table

A On / Off Control

B Power “+” and “-” controls

C Power pre-set / Boost controls

D Boil function selector

E Timer “+” and “-” controls

F Elapsed time function

G Lock Control

1 2 3 4 5 6 7 8 9 10 11 ... 14 15

Keine Kommentare

DeDietrich DTI1031X Installationsanleitung Seite 6