DeDietrich G130 Bedienungsanleitung PDF herunterladen (Seite 40)

Installing your hob in all simplicity

40

Changing the type of gas supply (cont'd)

Spanner

Spanner

Line

Line

Fig. 3

Fig. 2

Cover

Head

Dish

Grill

Glass top

Fig. 1

● Changing from natural gas to

butane/propane gas

When carrying out this operation, you

should successively:

➊

Adapt the gas connection

❷

Change the injectors

❸

Adjust the retarder on the taps

➊

ADAPT THE HOB CONNECTION to the

new gas adjustment. Refer to the pa-

ragraph “Gas connections”.

❷

CHANGE THE INJECTORS in the follo-

wing way:

•

Remove the supports, and all the

burner caps and heads.

•

Using the spanner supplied, uns-

crew the injectors at the bottom of ea-

ch dish and remove them (fig 1).

•

Replace these with the injectors

supplied in the wallet, in accordan-

ce with the gas rating table at the

end of the chapter; to do this:

➪ Screw in the injectors by hand

until they are tight.

➪ Put the spanner well onto the in-

jector.

➪ With a pencil draw a line on the

hearth plate as indicated (fig. 2).

➪ Turn the spanner clockwise un-

til the line appears on the other

side (fig. 3). Warning! Do not

go beyond this limit as you

are liable to cause damage.

● Preliminary remarks

This hob comes preset for natural

gas.

The injectors needed for adaptation to

butane/propane can be found in the

plastic bag containing the instructions.

Please see the corresponding paragraph

on "Gas Connections".

You can obtain an adapter sachet

from your After-sales Service.

Every time you change your gas

supply, mark the square on the label

in the wallet that corresponds to the

new type of gas (See "Gas Rating" in

this chapter).

99627415_ML_B.qxd 02/09/04 08:59 Page 40

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 111 112

Kommentare zu diesen Handbüchern

Keine Kommentare