Installing your hob in all simplicity
The hob must be built into the work-
top of a support cupboard. This work-
top must be at least 3 cm thick and
heat-resistant or else coated with a
heat resistant material.
A side-clearance of at least 30 cm
should be left to the right and left of
the hob. A tall cupboard or partition
too close to the hob would hinder free
movement of kitchen utensils.
If a horizontal partition is put under
the hob, it must be placed between 10
and 15 cm from the bottom of the
worktop. In any case, do not keep any
sprays or pressurized containers in the
compartment which could be just un-
der the hob.
Place the hob unit into the opening in
the worktop by carefully pulling it to-
wards you.
Put the burners, caps and pan grates
back into position.
Connect the hob power cable to your
kitchen electricity supply (See "Elec-
trical Connections" for your hob).
If you wish you can lock the hob into
position using attachments that come
with screws (see picture opposite) and
are secured to the corners of the
housing. You must use the holes
provided for this purpose.
Stop screwing when the lug
starts to bend.
Do not use a power screwdriver.
Fitting recommendations (cont'd)
Kommentare zu diesen Handbüchern